How To Repair Asphalt & Top Rolling Techniques

Repair Asphalt & Top Rolling Techniques

Who likes deteriorated asphalt surfaces or defects such as cracks and potholes? If you consider each one as a small thing,  it has all the potential to cause lasting damage to the pavements or in the parking lot. Its maintenance is the most effective tool to prevent your pavements from severe weather conditions or heavy traffic. We can not control such a natural phenomenon, but at least significant repairs can reduce the risk of property damage and personal injury.

Get professional help for asphalt patching from a full-service paving company in Texas!

Asphalt Patching Techniques

No more short-term delays to the repairing of minor issues!

Our Texas repairing services revitalize the appearance and safety of your asphalt. The patching is recommended for damages that go one to two inches deep. On average, it lasts for about two years, depending on the frequency of use and weather conditions. The pavement patching treats the reflective cracking caused due to repeated stress concentration of the asphalt. Several layers are removed until the damaged portions get extracted completely. We work on surfaces, including parking lots, pathways and trails, roadways, and playground blacktops.

Semi-permanent patches

It is a long-lasting solution that requires proper surface preparation. The solution emphasizes removing the water and debris first with the help of a broom. Then the area is cut back with a hand tool. It quickly restores the damaged asphalt and compacts the area using a vibratory roller.

Spray injection method

The method uses special truck-mounted equipment to blow out the water and debris from the cracks. It does not require compaction. The injection is done at high pressure, and we suggest a temporary throw-and-roll method.

Throw and roll technique

Fill it, seal it, and roll it rightly

The asphalt rolling technique for throw and roll is a temporary patching technique that involves filling liquid asphalt into a hole and then getting rolled up. It can be applied in layers and starts to solidify as it reacts with air. The technique is performed in emergencies.

Full-depth patching

It is a complex and standard technique for permanently repairing asphalt issues.

It excavates the patching area to 4 inches or more by extending at least one foot into the surrounding area. The patching method provides firm support by applying a tack coat followed by a backfill for proper bonding.

How To Repair Asphalt With Affordable Maintenance Plans?

Asphalt repair is an essential part of any parking lot or driveway. When it gets cracked, it begins to lose its flexibility, leading to other pavement defects.

Traditional pothole repair

It is also referred to as a full-depth replacement. Its underlying base gets removed and replaced and addresses the structural issues. Suppose you need to replace large pavement areas. In that case, we suggest you go for the traditional technique of fixing all the depressions, alligator cracking, upheavals, and other pavement defects causing structural defects.

Infrared pothole repair

This cutting-edge pavement technology allows the potholes to get permanently fixed in about 15 minutes. With the infrared repair, pavement gets heated and softened using panels. Then the contractor adds the new asphalt to the existing material. No water can penetrate the patch, causing problems.

Crack repair

The asphalt patch repair includes using high-quality, polymer-based materials and locking the moisture, chemicals, and debris out of the underlying pavement structure. Crack repair protects your pavement investment and doubles the life of your pavement.

Read More: How To Avoid Moisture Problems In Your Attic

How To Prevent Asphalt Damage?

Prevent the occurrence and worsening of damage to asphalt through regularly scheduling seal coat services and repairs on a timely basis.

Fill in the cracks and other small depressions to improve the functional lifespan of the surface. It will also prevent minor issues from becoming costly disasters.

Keep the pavement clean by spraying the pavement with a hose or broom and sweeping away debris. You can use a more intensive cleaning method if you find spills and stains by scrubbing them with a stiff-bristled brush.

Try to distribute the weight evenly by changing the location of the cars and trucks parked on it. Asphalt can weaken when put under too much stress. So, park it in a different spot from time to time.

Back to list

Leave a Reply

Your email address will not be published. Required fields are marked *